+91-022-22003881 info@bipico.com

FILES

 BIPICO STEEL FILES are made from “High Carbon Alloy Steel” which gives higher hardness & toughness followed by “Sharp & Aggressive” teeth which will result into fast material removal, better sharpening and long lasting performance. The Files are broadly classified in three cut types as Bastard Cut, Second Cut and Smooth Cut. Basically Bastard Cut Files are used for fast material removal, Second Cut & Smooth Cut Files are used for sharpening and for smoothening the surface. Engineering Files are used in engineering , automobile industries, workshops and other mechanical works. Agro Files are generally used by farmers, tool industries and other sharpening purposes. Saw Files are used to sharpen the Machetes, Bandsaw, Circular Saw, General Purpose Saw and mostly by carpenters. The File is inspected and tested individually on different quality parameters with match International Standards in all respects to conform the consistent performance and assured for best quality to meet customer’s expectations.

Length MM 100 125 150 175 200 250 300 350 AVAILABLE IN CUTS
  INCHES 4 5 6 7 8 10 12 14  
Flat W x T 12 x 3 16 x 4 20.6 x 5 25.4 x 6.15 30.6 x 6.6 36 x 7.7 1-2-3
Flat (Suterlight) W x T 25.4 x 4.5 30.6 x 5.6 1-2
flat file
Hand W x T 12 x 3 16 x 4 20.6 x 5 25.4 x 6.15 30.6 x 6.6 36 x 7.7 1-2-3
hand file
Half Round W x T 12 x 4 16.3 x 5 20.4 x 6 24.9 x 7.3 29.8 x 8.9 34.8 x 10.5 1-2-3
half round file
Square W x T 3.9 5 6 7.5 9.6 12.2 15.9 1-2-3
square file
Round W x T 3.8 5 6.3 7.15 9.25 12 16 1-2-3
round file
Three Square (Triangular) W 9 10 12.7 15.5 19 21.6 24.6 1-2-3
triangular file
Piller Raguler W x T 11.3 x 5.7 14.5 x 7.3 18 x 9 21 x 10.6 1-2-3
pillar file
Warding W x T 12.1 x 1.4 14.1 x 2 16.4 x 2.3 20.5 x 2.9 24 x 3.5 1-2-3
warding file
Knife W x T 12.9 x 3.3 17.8 x 4.3 22.3 x 5.4 27.4 x 6.6 23.5 x 7.6 1-2-3
knife file
 
LENGTH MM 100 125 150 175 200 250 300 350 AVAILABLE IN CUTS
INCHES 4 5 6 7 8 10 12 14
Flat W x T 12 x 3 - 16 x 4 - 20.6 x 5 25.4 x 6.15 30.6 x 6.6 36 x 7.7 1-2-3
Flat (Superlight) W x T - - - - - 25.4 x 4.8 30.6 x 5.6 - 1-2
Hand W x T 12 x 3 - 16 x 4 - 20.6 x 5 25.4 x 6.15 30.6 x 6.6 36 x 7.7 1-2-3
Half Round W x T 12 x 4 - 16.3 x 5 - 20.4 x 6 24.9 x 7.3 29.8 x 8.9 34.8 x 10.5 1-2-3
Square W x T 3.9 5 6 - 7.7 9.6 12.2 15.9 1-2-3
Round W x T 3.8 5 6.3 - 7.15 9.25 12 16 1-2-3
Three Square (Triangular) W 9 10 12.7 - 15.5 19 21.6 24.6 1-2-3
Pillar Regular W x T - - 11.3 x 5.7 - 14.5 x 7.3 18 x 9 21 x 10.6 - 1-2-3
Warding W x T 12.1 x 1.4 14.1 x 2 16.4 x 2.3 - 20.5 x 2.9 24 x 3.5 - - 1-2-3
Knife W x T 12.9 x 3.3 - 17.8 x 4.3 - 22.3 x 5.4 27.4 x 6.6 32.5 x 7.6 - 1-2-3
 
 
MACHINIST' FILES USAGE
FILE TYPE USES
FLAT

FLAT (SUPERLIGHT )

Used in practically all trades for general work on iron,

steel, etc. for smoothing surface and for rapidly removing sharp edges and burr.

HAND Have one uncut safe edge and so can be used in corners and

close to shoulders

HALF ROUND Used for general purpose and for rapid removal of metal from

convex and concave as well as flat surfaces.

SQUARE Square files are used principally for filing slots, keyways,

and,also for general surface filing. In larger sizes, the Square file is

preferred to the Flat file, because of the heavier section and four filing

surfaces.

ROUND Mainly used to file circular openings or concave surfaces.
3 – SQUARE Used for filing internal acute angles, clearing out square

corners, etc.

PILLAR Suitable for enlarging small slots and keyways or for jobs

where the hand file is too wide or too thick to be used.

WARDING These are used principally by locksmiths in repairing or

filing ward notches in keys. Also suited for use in narrow spaces where other

files will not fit.

KNIFE Generally used by tool and die maker for slots, keyways and

filing narrow passages in cutting slant metal shape.

Length MM 100 115 125 150 175 200 225 250 300 350 AVAILABLE  IN CUTS
  INCHES 4 4.5 5 6 7 8 9 10 12 14  
TAPER Slim W 6.1 7.2 7.2 9 10.5 12.7 13.5 15.5 19 2
Extra W 5.0 6.1 6.1 7.2 9 10.5 2
Double Ex. Slim W 4.5 5.0 6.1 7.2 8.2 2
Regular W 9.0 10 10.5 12.7 14.5 15.5 16.5 19 21.6 2
Heavy W 10 12.7 13.5 15.5 16.5 18.5 21.6 2
taper saw
Double Ender #colspan# W 6.1 6.1 7.2 9.0 10.0 2
double ender saw
Band Saw Blunt W 10.5 12.7 13.5 15.5 2
band blunt saw
Pit Saw W x T 8.3 x 4.2 9.3 x 4.7 10.3 x 5.2 11.3 x 5.7 2
pit saw
Mill Regular W x T 11.5 x 1.9 16 x 3.0 18 x 3.2 20.6 x 3.7 25.4 x 4.8 30.6 x 5.6 36 x 6.5 1-2-3
mill saw
Mill Blunt ORE/TRE/TSE W x T 16 x 3.0 18 x 3.2 20.6 x 3.7 25.4 x 4.8 30.6 x 5.6 1-2-3
mill blunt saw
Farmer Own W x T 20.6 x 3.7 25.4 x 4.8 30.6 x 5.6 30.6 x 5.6 2
farmers own saw
Double Edge Saw W x T 18 x 6.0 18 x 6.0 2
double edge saw
Feather Edge W x T 27.3 x 9.6 27.3 x 9.6 2
feather edge saw
 CUTS : – 1 -BASTARD, 2 – SECOND CUT , 3 – SMOOTH
LENGTH MM 100 115 125 150 175 200 225 250 300 350 AVAILABLE IN CUTS
INCHES 4 4.5 5 6 7 8 9 10 12 14
Slim W 6.1 7.2 7.2 9 10.5 12.7 13.5 15.5 19 - 2
Extra W 5.0 6.1 6.1 7.2 9 10.5 - - - - 2
Double Ex. Slim W 4.5 - 5.0 6.1 7.2 8.2 - -   - 2
Regular W 9.0 10 10.5 12.7 14.5 15.5 16.5 19 21.6 - 2
Heavy W 10 - 12.7 13.5 15.5 16.5 18.5 21.6 - - 2
Double Ender W - - - 6.1 6.1 7.2 9.0 10.0 - - 2
Band Saw Blunt W - - 10.5 12.7 13.5 15.5 - - - - 2
Pit Saw W x T 8.3 x 4.2 9.3 x 4.7 10.3 x 5.2 11.3 x 5.7 - - - - - - 2
Mill Regular W x T 11.5 x 1.9 - - 16 x 3.0 18 x 3.2 20.6 x 3.7 - 25.4 x 4.8 30.6 x 5.6 30.6 x 5.6 1-2-3
Mill Blunt ORE/TRE/TSE W x T - - - 16 x 3.0 18 x 3.2 20.6 x 3.7 - 25.4 x 4.8 30.6 x 5.6 - 1-2-3
Farmer Own W x T - - - 20.6 x 3.7 - 25.4 x 4.8 - 30.6 x 5.6 30.6 x 5.6 - 2
Double Edge Saw W x T - - 18 x 6 18 x 6 - - - - - - 2
Feather Edge W x T - - 27.3 x 9.6 27.3 x 9.6 - - - - - - 2
 
SAW FILES USAGE
FILE TYPE USES
TAPER

SLIM, EXTRA SUM, DOUBLE EXTRA, REGULAR, HEAVY

Taper saw files are for sharpening standard hand saws or other swaws having

60°angle teeth. In general,

the extra slim and double extra slim in the shorts lengths are for fine teeth

saws and the longer lengths of the regular or slim are for coarse teeth saw.

DOUBLE ENDER These files have no tang, instead are tapered at both ends.

They are used to sharpen saws having a 60°angle. The files can be used from both

ends and are supplied with handles.

BAND SAW – BLUNT Bandsaw blunt files are for sharpening standard blades

having well rounded gullets.

PIT SAW Used for sharpening pit saws and also very popular as

all-purpose files.

MILL – REGULAR Mill files are used for sharpening mill saws or circular

saws and various cutting tools and as a general purpose shop file.

MILL -ORE /THE Same as Regular Mill files except that they have 1 or 2

round edges. The round edges prevent the files from causing sharp corners or

edges in the gullets of circular cross cut saws.

FARMERS' OWN A handy file for farmers. Used for sharpening agricultural

tools and knives of reaping and moving machines.

DOUBLE EDGE Used for filing saws where included angle of teeth is less

than 60°

FEATHER EDGE